Maintance
& Warranty

1. In day-to-day and transportation do not overload the furniture and do not drag them.

2. Never use the products as a support or ladder.

3. Do not jump over the product or sit on its arms or back.

4. Avoid contact of furniture with suntan lotions and repellents, as they may stain the product.

5. It is not recommended to use products that contain acids, caustic soda, alcohol, acetone, solvents, among others, in cleaning.

6. Even waterproofed, the fabrics of the pillows can absorb water, in case it occurs, place them in a dry and ventilated place, in upright position, to avoid the appearance of mold.

7. Clean daily, avoiding the accumulation of dust.

8. Wooden product, as it is a natural material, it may change its colour shade over time, check maintenance instructions.

9. Woods for external use, have a high density of fibers and, therefore, they are more susceptible to warping, cracks, and structural changes, especially when the product does not have periodic protective varnish maintenance.

10. It is not recommended to use the products in the shallowest part of the pools. Actions of chlorine and chemical agents found in water can damage products.

11. Do not use a high pressure jet for cleaning.

Metal with Electrostatic Painting

1. For good product maintenance, just wash it with water, neutral soap and soft sponge, then dry with a dry, soft cloth.

2. Do not to keep painting submerged in water, it can peel and / or stain.

3. Never use abrasive products.

Wooden Products

1. For heavy cleaning, wash the product with water, neutral soap and soft sponge. Then dry with a dry, soft cloth.

2. Never use abrasive products.

3. It is necessary to carry out periodic maintenance according to the need of the furniture, according to the instructions below:
- Wash the furniture with water and neutral soap;
- Dry well;
- Sand the wood lightly with fine wood sandpaper;
- Lightly moisten a sponge with matt Sparlack varnish, or other protective varnish of your choice, preferably matte and apply it to the wood;
- Let dry, if necessary, apply a new layer.

Products in Fiber, Mesh (tela) or Nautical Rope

1. The fibers, meshes (telas) and nautical ropes are highly resistant to the time actions, however, for greater durability, protect your furniture with covers or remove them from direct exposure to the weather.

2. Small changes in color shade can occur with extended use and exposure to bad weather.

3. For cleaning, use neutral soap and a soft sponge, clean with light movements so as not to damage the weft and / or the fiber / mesh tela/ rope.

Acquatec, Polyester and Acrylic Fabrics

1. The external fabrics have waterproofing and UV protection for greater resistance, however, its external use for a long period is not advisable, it is recommended to protect the product from the weather after use.

2. Clean the fabric daily with a soft sponge and neutral soap, to avoid dirt accumulation and let it to dry in the open air.

3. Do not use steam iron, its excessive heat shrinks and can stain the fabric.

4. Periodically and for cleaning stains on the fabric, it is recommended to use professional assistance which must follow the instructions contained in this website.

Cushioned

1. The cushions are produced with foams of easy drainage, whenever wet, place it in an upright position to drain the water and facilitate drying.

2. Never leave them wet or store them without drying, to avoid the appearance of molds.

3. Avoid its external use for a long period of time, it is recommended to protect the product after using for greater longevity.

Concrete top

1. For cleaning, use a dry or damp cloth with only clean water. Do not rub the surface. The pieces receive semi-gloss resin that protects them from the weather.

2 Over time, the maintenance of the colorless matte resin finish for concrete will be necessary to avoid stains.

3. In case of a liquid accident, quickly remove and dry the area with a soft damp cloth or running water.

4. Do not use cleaning or chemical products for cleaning, as they damage the protective resin and / or the concrete.

Natural Stones

1. For cleaning, use a dry or damp cloth with only clean water. Do not rub the surface. Natural stones do not have resin protection and are permeable, therefore dark liquids can stain the piece.

2. In case of a liquid accident, quickly remove and dry the area with a soft damp cloth or running water. Do not use cleaning or chemical products to clean the stone.

Lamps

1. For cleaning, use a dry or damp cloth. Do not rub the surface. Wooden parts may need periodic maintenance, according to the information contained in this website.

2. It is advised the use of the lamps in covered areas, although all the structures are suitable for external use, the components of the electrical part may suffer from weather actions, requiring replacement during use.